Leveraging the Dielectric Barrier Discharge Plasma Process to Create Regenerative Biocidal ePTFE Membranes.

The utilization of dielectric barrier discharge (DBD) plasma treatment for modifying substrate surfaces constitutes an easy and simple approach with a potential for diverse applications. This technique was used to modify the surface of a commercial porous expanded poly(tetrafluoroethylene) (ePTFE) film with either dimethylaminoethyl methacrylate (DMAEMA) or (trimethylamino)ethyl methacrylate chloride (TMAEMA) monomers, aiming to obtain antibacterial ePTFE. Physicochemical analyses of the membranes revealed that DBD successfully enhanced the surface energy and surface charge of the membranes while maintaining high porosity (>75%) and large pore size (>1.0 µm). Evaluation of the bacteria killing-releasing (K-R) function revealed that both DMAEMA and TMAEMA endowed ePTFE with the ability to kill Escherichia coli bacteria. However, only TMAEMA-grafted ePTFE allowed for the release of dead bacteria from the surface upon washing with sodium hexametaphosphate (SHMP) saline solution, owing to its cationic charge derived from the quaternary amine. Washing with SHMP disturbed the electrostatic force between the polymer brushes and dead bacteria, which caused the release of the dead bacteria. Lastly, dead-end bacteria filtration showed that the TMAEMA-grafted ePTFE was able to kill 99.78% of the bacteria, while approximately 61.55% of bacteria were killed upon contact. The present findings support the feasibility of using DBD plasma treatment for designing surfaces that target bacteria and aid in the containment of disease-causing pathogens.

Inactivation of bacteria by a mixed argon and oxygen micro-plasma as a function of exposure time.

PURPOSE: A radio-frequency dielectric barrier discharge (DBD) was applied as a micro-plasma device for the inactivation of bacteria, e.g., Escherichia coli. MATERIALS AND METHODS: The cultured bacteria were placed on a polydimethyl siloxane (PDMS) film and placed inside the DBD cavity. The bacteria were exposed to micro-plasmas of varying oxygen/argon ratios for different exposure times. The survival of the bacteria was measured by determining bacterial growth using optical methods. RESULTS: The excited oxygen species increased with the increase in the oxygen to argon ratio as measured by optical emission spectroscopy (OES), but the increase of excited oxygen species in argon micro-plasma did not enhance the inactivation of bacteria. In contrast, increases in the time the bacteria were exposed to the micro-plasma were of importance. The results show that a continuous plasma flow containing energetic and reactive species may result in electro-physical interactions with bacteria exposed to the plasma leading to their inactivation. CONCLUSION: For currently-employed DBD device, addition of 0.5% oxygen to the argon micro-plasma for an exposure time of 30 sec was optimum for the inactivation of E. coli.

Genetic relationships of Aglaonema species and cultivars inferred from AFLP markers.

BACKGROUND AND AIMS: Aglaonema is an important ornamental foliage plant genus, but genetic relationships among its species and cultivars have not been reported. This study analysed genetic relatedness of 54 cultivars derived from nine species using amplified fragment length polymorphism (AFLP) markers. METHODS: Initially, 48 EcoRI + 2/MseI + 3 primer set combinations were screened, from which six primer sets that showed clear scoreable and highly polymorphic fragments were selected and used for AFLP reactions. AFLP fragments were scored and entered into a binary data matrix as discrete variables. Jaccard's coefficient of similarity was calculated for all pair-wise comparisons among the 54 cultivars, and a dendrogram was constructed by the unweighted pair-group method using the arithmetic average (UPGMA). KEY RESULTS: The number of AFLP fragments generated per primer set ranged from 59 to 112 with fragment sizes varying from 50 to 565 bp. A total of 449 AFLP fragments was detected, of which 314 were polymorphic (70 %). All cultivars were clearly differentiated by their AFLP fingerprints. The 54 cultivars were divided into seven clusters; cultivars within each cluster generally share similar morphological characteristics. Cluster I contains 35 cultivars, most of them are interspecific hybrids developed mainly from A. commutatum, A. crispum or A. nitidum. However, Jaccard's similarity coefficients among these hybrids are 0.84 or higher, suggesting that these popular hybrid cultivars are genetically much closer than previously thought. This genetic similarity may imply that A. nitidum and A. crispum are likely progenitors of A. commutatum. CONCLUSIONS: Results of this study demonstrate the efficiency and ease of using AFLP markers for investigating genetic relationships of ornamental foliage plants, a group usually propagated vegetatively. The AFLP markers developed will help future Aglaonema cultivar identification, germplasm conservation and new cultivar development.